Display Language; Trying The Camera Out - Canon PowerShot ELPH 140 IS User Manual

Display Language

Change the display language as needed.
1
z
2
z
3
z
z
•
You can also change the display language by pressing the <n> button
and choosing [Language
Downloaded From camera-usermanual.com Canon Manuals
Enter Playback mode.
z
Press the <1> button.
Access the setting screen.
z
Press and hold the <m> button, and
then press the <n> button.
Set the display language.
z
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
z
Once the display language has been set,
the setting screen is no longer displayed.
] on the [3] tab.

Trying the Camera Out

Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
z z
Press the power button.
z z
The startup screen is displayed.
2
Enter [
z z
Press the <o> button several times until
[
z z
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
ELPH 150 IS
z z
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
ELPH 135
z z
A scene icon is displayed in the upper
right of the screen.
z z
Frames displayed around any detected
subjects indicate that they are in focus.
Still Images Movies
] mode.
] is displayed.
IXUS 155 ELPH 140 IS IXUS 150
IXUS 145
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
15