Screen Brightness; Formatting Memory Cards - Canon PowerShot ELPH 140 IS User Manual

Screen Brightness

Adjust screen brightness as follows.
z
•
For maximum brightness, press and hold the <p> button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [3] tab.) To restore
the original brightness, press and hold the <p> button again for at least one
second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z
Downloaded From camera-usermanual.com Canon Manuals
z
Choose [LCD Brightness], and then
press the <q><r> buttons to adjust the
brightness.
z
Choose [Start-up Image], and then
choose [Off].

Formatting Memory Cards

Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
An Eye-Fi card (= 96) contains software on the card itself. Before
formatting an Eye-Fi card, install the software on a computer.
1
Access the [Format] screen.
z z
Choose [Format], and then press the
<m> button.
2
Choose [OK].
z z
Press the <o><p> buttons to choose
[Cancel], press the <q><r> buttons to
choose [OK], and then press the <m>
button.
3
Format the memory card.
z z
To begin the formatting process, press
the <o><p> buttons to choose [OK],
and then press the <m> button.
z z When formatting is finished, [Memory
card formatting complete] is displayed.
Press the <m> button.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
76