Special Modes for Other Purposes
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(=
53). This is useful when including yourself in group photos or similar
shots.
1
z
2
z
3
z
z
Downloaded From camera-usermanual.com Canon Manuals
Still Images
Choose [ ].
z
Follow step 1 in "Specific Scenes"
(=
40) and choose [
].
Compose the shot and press
the shutter button halfway.
z
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
Press the shutter button all the
way down.
z
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
z
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the
shooting area and look at the
camera.
z
z
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z
z
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
•
Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
•
To change the number of shots, press the <p> button, press the <q><r>
buttons to choose the number of shots, and then press the <m> button. [Blink
37) is only available for the final shot.
Detection]
(=
Before Use
Before Use
Basic Guide
Basic Guide
Advanced Guide
Advanced Guide
Camera Basics
Camera Basics
Auto Mode
Auto Mode
Other Shooting
Other Shooting
Modes
Modes
P Mode
P Mode
Playback Mode
Playback Mode
Setting Menu
Setting Menu
Accessories
Accessories
Appendix
Appendix
Index
Index
45