Rotating Images - Canon PowerShot ELPH 140 IS User Manual

2
z
z
z
3
z
z
Specifying All Images at Once
1
z
2
z
Downloaded From camera-usermanual.com Canon Manuals
Choose an image.
z
Once you choose an image following
step 2 in "Choosing Images Individually"
(= 67), [ ] is displayed.
z
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
z
Repeat this process to specify other
images.
Erase the image.
z
Press the <n> button. A confirmation
message is displayed.
z
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Choose [Select All Images].
z
Following step 2 in "Choosing a Selection
Method" (= 68), choose [Select All
Images] and press the <m> button.
Erase the images.
z
Press the <q><r> buttons to choose
[OK], and then press the <m> button.

Rotating Images

Change the orientation of images and save them as follows.
1
Choose [\].
z z
Press the <m> button, and then choose
[\] in the menu
2
Rotate the image.
z z
Press the <q> or <r> button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the <m> button to complete
the setting.
Using the Menu
1
Choose [Rotate].
z z
Press the <n> button and choose
[Rotate] on the [1] tab
Before Use Before Use
Still Images
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
(= 22).
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
(= 23).
69