Activating The Demo Mode - Magellan GPS 310 User Manual

SELECT COUNTRY or STATE. Use the ARROW pad to
change the flashing text to select the country or state for your
present location.
Press .
ENTER
ENTER ELEVATION. Use the ARROW pad to enter the
approximate elevation for your position. If unknown, leave
the elevation at 0. Press
ENTER TIME. Use the ARROW pad to enter your present
time. Press .
ENTER
ENTER DATE. Use the ARROW pad to enter the date.
Press .
ENTER
Note: The prompts to enter time and date will not appear if
your receiver has already collected this information from the
satellites.

Activating the Demo Mode

To turn on the Demo Mode, press
displayed at the top of the screen and press
RIGHT ARROW until SETUP DEMO is displayed. To
toggle between ON or OFF, press
status, on or off, will flash. Use the LEFT/RIGHT ARROWs
to switch between on and off and press
While in the Demo Mode, the receiver displays sample
information on the POSITION and both NAVIGATION
screens.
30
.
ENTER
until SETUP is
MENU
. Use the
ENTER
. The present
ENTER
.
ENTER