Activating A Leg In A Route - Magellan GPS 310 User Manual

Activating a Leg in a Route

As you are navigating you may decide that you no longer wish
to continue on the leg that you are now using. Instead you
wish to use another leg of the route. You will need to activate
the leg of the route with the desired destination (TO land-
mark).
Press until ROUTE appears at the top of the display.
MENU
Press . Use the LEFT/RIGHT ARROWs until the leg
ENTER
you wish to activate is displayed. Press the UP ARROW. If
the leg is not active, the display indicates ENT TO ACTI-
VATE. Press
ENTER
NAV screen is displayed, and the receiver begins to compute
the necessary information to continue you on the route using
the leg you selected.
If the display indicates ENT TO DEACTVATE, it means that
the receiver is using this leg to compute the navigational
information. Pressing ENTER at this screen not only
deactivates the leg and returns to the leg summary screen, but
deactivates the route as well.
22
. The leg has become activated, the