Accessing The Map Screen; 20 Mode; Setting The Map Modes (20 Or 3D); Panning On The Map - Magellan Maestro 4040 User Manual

Accessing the Map Screen
1. On the Main Menu, tap
Show Map.
20 Mode
The map is normally displayed in 3D mode but you
can set the map to 20 mode if so desired. Choose
the mode that is best su ited for you.
In 20 mode, you can pan across the map looking for
a location to route to or save in your address book.
Setting the Map Modes (20 or 3D)
1. From the Map screen, tap
MENU.
2. Tap the
Next arrow
to access page 2 of the
Main Menu.
3. Tap
User Options.
4. Tap
Map Options.
5. Tap
30 Map or 20 Map.
6. Tap
Save.
Map Screen in 2D Mode
Panning on the Map
1. While viewing the Map screen in 20 mode, slide your finger or stylus across the map.
2. The location icon changes to . (The circle is the crosshairs for a position and the red
arrow points to your current location.
3. To exit panning, tap and the map is returned to your current position.
Saving a Position While Panning
1. Pan the map until the icon crosshairs are over the location you want to save to your address
book. (Must be a position that is does not have a POI icon displayed.)
2. Tap in the center of the icon circle. (If nothing happens then you are not loomed in enough.
Tap the
loom
in icon and try again.)
3. On the Route To This Address? screen, tap
t.. .
< .,.,;.~<.~~~:,<.,"~,u~
4. Edit Information:
Tap
[.~di~~·~.~]
on the Edit Name line to create a name for this location.
Tap on any of the three (work, home, mobile) phone buttons to enter a phone number.
Tap on the Edit Information line to add additional information. (Up to 35
characters can be entered.)
5. If you want to tag this location as one of your favorites, tap on the "Favorite" check box.
Map Screen 13