Activating The Over Zoom Mode - Magellan FX324 MAP Manual

Activating the Over Zoom Mode

When this mode is active, the OVERZOOM indication appears when the
selected zoom scale makes it impossible to display the chart with a good
definition.
If the Over zoom mode is not active, only the zoom scales allowed by the
loaded chart are available.
Menu PLOT Tab
Select Yes (active) or No (inactive) and push Enter.
Note: You must be very careful when the OVERZOOM indication is
displayed on the Plotter screen since the lack of definition for the
chart causes discrepancies with the reality.
8-Over zoom
69