Changing Distance Units; Changing Time Display And Time - Magellan GPS 310 User Manual

Changing Distance Units

Your distance units can be in miles and miles per hour (MI-
MPH), nautical miles and knots (NM-KTS), or kilometers
and kilometers per hour (KM-KPH). To change the units,
press until SETUP is displayed at the top of the screen
MENU
and press . Use the RIGHT ARROW until SETUP
ENTER
UNITS is displayed. Press
unit of measure begins to flash. Use the RIGHT/LEFT
ARROWs to scroll through the list of units and press
when the desired unit of measure is displayed.

Changing Time Display and Time

To change the way that time is displayed (12 HOUR- default,
24 HOUR, or UT), repeatedly press
displayed at the top of the screen and press
RIGHT ARROW until SETUP TIME is displayed. Press
again and the time display begins to flash. Use the
ENTER
RIGHT/LEFT ARROWs to scroll through the list and press
to select. The screen changes to TIME SET. Use the
ENTER
ARROW pad to set the time and press
(You are not prompted to set the time if you selected UT as
the time format.)
When you change your clocks because of daylight savings
time, remember to change the time in your GPS 310.
28
again and, the distance
ENTER
ENTER
until SETUP is
MENU
. Use the
ENTER
when done.
ENTER