Frequently Asked Questions - Magellan GPS 310 User Manual

navigation information (destination pointer, etc.) is not
updated until you are moving. (The receiver is unable to
detect which way you are facing while you are stationary.)
Position coordinates on your receiver do not match the
location on your map.
1. Make sure that your receiver is set up to use the same da-
tum as your map. The map datum is generally shown in
the map legend. See Map Datum under Setup for instruc-
tions on selecting the map datum in your receiver.
2. Check your LAT/LON format. Make sure that the format
selected in COORDINATE SYSTEM (DEG/MIN/SEC
or DEG/MIN.MM) is in the same format as the map you
are using.
Receiver turns off unexpectedly.
1. This most commonly is caused by excessive static electric-
ity. Turn the receiver back on and it should operate nor-
mally. Move the receiver to a different location to aviod a
similar occurance.

Frequently Asked Questions

Does the receiver adjust itself for daylight savings time?
No. You need to reset the time for changes in your area.
(See "Changing Time Display and Time" on page 28.)
Will my receiver function correctly in the year 2000?
Absolutely. Even though only the last two digits of the year
are displayed, the full year designator is stored in memory.
42