Using The Alarm - Akai CEU1300 Instruction Manual

SETTING THE CLOCK (Cont'd)
TO SET THE DAYLIGHT SAVING TIME (DST)
1. Depending on your location and the period of Daylight Saving Time (DST) to be
in effective during summer, you can manually set the daylight saving time by sliding
the DST switch on the unit to +1 position to advance the clock by one hour.
2 Slide the DST switch to -1 position to substrate one hour from current to back to
normal daylight time.
TO SET TIME AND DATE MANUALLY
Although the clock is preset at factory, you can still want to make time adjustment by manual
setting.
Note: If the preset time is slight deviated from actual current time or clock error occured
during the shipment or your first time use, you can also follow the steps below to make
time/date adjustment manaully.
1. Press and hold the CLOCK SET/YEAR button on the top of the unit for 2 sec
until the hour flashes on the display.
2. Press the + or - button to set the correct hour (hold the button for faster advance).
Remember to set the correct AM or PM time. The AM/PM Indicators appear to the left
of the time display.
3. Press the CLOCK SET/CALENDAR button gain. Press the + or - Button to set the
correct minute (hold the button for faster advance).
4. Press the CLOCK SET/CALENDAR button again. The year will flash. Press the + or -
Button until the current year is displayed.
Press the CLOCK SET/CALENDAR button again. The month will flash. Press the + or -
5.
Button until the current month is displayed.
Press the CLOCK SET/CALENDAR button again. The date will flash. Press the + or -
6.
button until the current date is displayed.
7. Press the CLOCK SET/CALENDAR button again (or no button pressed within 10
seconds) to exit the manual setting mode.
TO SET MONTH/DATE AND 12/24 HOUR FORMAT
1. You can select the clock display format by sliding the 12/24HR switch to toggle the
clock display format to 12 hour or 24 hour.
2. You can select the calendar display format by sliding the M/D and D/M switch to toggle
between Month/Date or Date/Month display format.
TO DISPLAY THE YEAR
1. Press the CLOCK SET/YEAR button. Year will display for 2 seconds.

USING THE ALARM

CEU1300 has a dual alarm system. The unit allows you to set each alarm to wake-to selectable
sound sources from either radio or buzzer independently. The unit also allows you to set each
alarm frequencies with Everyday/Weekday/Weekend alarm modes.
ALARM 1 and ALARM 2 can be set with the same procedures.
8