Operation; Clock Functions; Setting The Alarm Time - Akai AR270P User Manual

5.

Operation

● To adjust the volume level, turn the VOLUME dial (21) to the required
position.
● To set the display brightness, press the SNOOZE/DIMMER button (6).
● To project the time onto the wall or the ceiling, press the PROJECTION
button (9).
5.1

Clock functions

Setting the current time
● Press the SET button (3) once. The display (11) shows the time and
flashes.
● Press the + button (5) or the - button (4) to set the current time. Press and
hold the corresponding button to accelerate the process.
Setting the time format
● Press the SET button (3) twice. The display (11) shows 24Hr and flashes.
● Press the + button (5) or the - button (4) to switch between 12Hr and
24Hr. If 12Hr is selected, the PM indicator (10) will come on.
Setting the snooze duration
● Press the SET button (3) thrice. The snooze indicator (12) comes on.
The display (11) shows 05 and flashes.
● Press the + button (5) or the - button (4) to set the snooze duration
(5 to 60 minutes).
During a power failure, or when unplugging the appliance, the time
i
settings are lost, unless backup batteries are installed.

Setting the alarm time

The alarm time can be set in radio and tone mode. Two time slots are
available (ALM 1 and ALM 2).
● Press the alarm button (7/8). The display (11) shows 6:00 and flashes.
● Press the + button (5) or the - button (4) to set the alarm time. Press and
hold the corresponding button to accelerate the process.
8