Listening To Radio - Akai CEU1300 Instruction Manual

LISTENING TO RADIO

TO SET UP ANTENNA
1. Extend FM antenna fully and rotate the unit to the best orientation for the best
reception.
TO TUNE THE RADIO TO DESIRED CHANNEL MANUALLY
Press the POWER ON/OFF button to turn on the radio.
1.
Press and hold the ▲ or ▼ button for 2 seconds (release when the
2.
frequency in the display starts to run automatically) the unit will scan upward or
downward until a channel with strong signal is found and stop at this channel.
3. Repeat the step 2 for tuning upward or download for searching other radio channel.
Press the VOLUME/SET + or - button to adjust the speaker volume level.
4.
To turn off the radio, press the POWER ON/OFF button once.
5.
PRESET RADIO CHANNEL
Press the POWER ON/OFF button to turn on the radio.
1.
2. Check whether the current frequency is the radio channel to be preset. If not, press
and hold ▲ or ▼ button for 2 seconds to scan for a radio channel.
Press and hold the RADIO PRESET button for 2 seconds.
3.
4. The "PRESET" and "1" icons are displayed and blinking.
5. Press ▲ or ▼ button to select the present preset station from 1 to 10 and stop at
the desired preset station.
6. Press RADIO PRESET button once to confirm and store the channel to the selected
preset station. The "PRESET" and channel icons stop to blink and will display for 3
seconds. Then they disappear and current time will be displayed.
7. Repeat step 2 to 6 to preset other radio channel.
NOTE: All preset stations had been set to 87.5MHz at the factory.
All preset stations will be stored in the memory and is backup by Lithium battery.
SELECT PRESET STATION
1. Press the POWER ON/OFF button to turn on the radio.
2. Radio channel is resumed to the last setting.
3. Press the RADIO PRESET button once to go to the previously activated preset station.
4. Press the RADIO PRESET button repeatly to walk through all preset stations
(looping 1=>2=>3...=>10=>1). Radio broadcast can be heard during the selection.
5. Stop at the desired preset station.
6. After 3 seconds the current time will be displayed together with RADIO and FM icon.
7. To select other preset station by pressing the RADIO PRESET button once to get the
"PRESET" and current channel icons in the display and then press this button repeatly
to go to the desired preset station before these icons disappear.
10