Connecting Power; Setting The Clock - Akai CEU1300 Instruction Manual

CONNECTING POWER

Plug the small end of the supplied power adapter into the DC IN jack at the back of the
unit, plug the adapter body into the standard AC wall socket.
CAUTION: The unit is designed to operate from a mains supply of AC 120V~60Hz. If the
adapter does not fit properly, turn it over and again. Do not force it.
NOTES: When the unit is not operated by the AC power or unused for long periods of the
time. Please remove the power adapter from the wall outlet and unplug from the main unit.

SETTING THE CLOCK

TO SET THE CLOCK FIRST TIME
This unit is an AUTOSET radio alarm clock. The time and date have been preset at the factory.
All you have to do is to plug-in the unit, the current time corresponding to the default time zone
will be displayed.
TO SET THE TIME ZONE
1. Plug in the unit. (The time corresponding to the default time zone will be displayed
alternatively on the display.) The default time zone is set to be time zone No.2 for
Eastern Standard Time (EST).
2. Select the correct time zone based on your geographical area by pressing the
VOLUME/SET + - button on the unit till the correct time is displayed. You can
review the displayed time to make sure the correct timezone is selected.
3. Once the correct timezone is displayed, please wait for about 2 seconds. The unit will
display the calendar information, followed by the current time to finish the setting.
4. You can also set the time zone manually later. Press and hold the TIMEZONE button
then press the + / - buttons to select the time zone and press the TIMEZONE button
to confirm.
NUMBER
1
2 (Default)
3
4
5
6
7
5V DC
12HR/24HR M/D D/M
TIMEZONE
Atlantic Standard Time
Eastern Standard Time
Central Standard Time
Mountain Standard Time
Pacific Standard Time
Yukon Standard Time
Hawaii Aleutian Standard Time
AUX IN
USB CHARGER +1 DST -1 +1 DST -1
(AST)
(EST)
(CST)
(MST)
(PST)
(YST)
(HAST)
7