Table of Contents
Advertisement
When you connect the appliance to the electrical supply
or in case of a power cut, the Time function indicator
flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the
display shows the time of day set.
For time change you must not set an automatic
function (Duration
Daily use
Warning! Refer to "Safety information" chapter.
Switching the Oven On and Off
1. Turn the oven functions control knob to an oven
function.
2. Turn the temperature control knob to a temperature.
Oven Functions
Oven function
OFF position
Oven lamp
Defrost
Fan cooking
Inner grill
or End
) at the same time.
Thaws frozen food. The temperature control knob must be on off position
To roast or roast and bake the food that requires the same cooking temperature,
using more than one shelf, without flavour transference.
To grill flat food items in small quantities in the middle of the shelf. To make toasts
Preheating
1. Set function
2. Run an empty oven for 45 minutes.
3. Set function
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface.
Accessories can become more hot than in normal use.
During this period an odour and smoke can be emitted.
This is normal. Make sure the airflow is sufficient.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and
Cleaning".
The temperature indicator comes on while the oven
temperature increases.
3. To switch off the oven, turn the oven functions control
knob and the temperature control knob to the Off po-
sition.
Application
The appliance is OFF.
Lights up without any cooking function.
and maximum temperature.
and maximum temperature.
5
Advertisement
Table of Contents
