Linking And Unlinking The Remote Keyless Entry Transmitter To Memory; Memory Position Recall - Jeep Grand Cherokee SRT 2015 Operating Information Manual

3. Press and release the S (Set) button on the
memory switch.
4. Within five seconds, press and release ei-
ther of the memory buttons (1) or (2). The
Driver Information Display (DID) will display
which memory position has been set.
NOTE:
• Memory profiles can be set without the
vehicle in PARK, but the vehicle must be
in PARK to recall a memory profile.
• To set a memory profile to your RKE
transmitter, refer to "Linking And Unlink-
ing The Remote Keyless Entry Transmit-
ter To Memory" in this section.
Linking And Unlinking The Remote
Keyless Entry Transmitter To
Memory
Your RKE transmitters can be programmed to
recall one of two pre-programmed memory pro-
files by pressing the UNLOCK button on the
RKE transmitter.
NOTE:
Before programming your RKE transmitters
you must select the "Memory To FOB" fea-
ture through the Uconnect® system screen.
Refer to "Uconnect® Settings " in "Under-
standing Your Instrument Panel" for further
information.
To program your RKE transmitters, perform the
following:
1. Cycle the vehicles ignition to the OFF posi-
tion.
2. Select a desired memory profile (1) or (2).
NOTE:
If a memory profile has not already been set,
refer to Programming The Memory Feature
in this section for instructions on how to set
a memory profile.
3. Once the profile has been recalled, press
and release the SET (S) button on the
memory switch.
4. Within five seconds, press and release but-
ton (1) or (2) accordingly. "Memory Profile
Set" (1 or 2) will display in the instrument
cluster.
5. Press and release the LOCK button on the
RKE transmitter within 10 seconds.
NOTE:
Your RKE transmitters can be unlinked to
your memory settings by pressing the SET
(S) button, and within 10 seconds, followed
by pressing the UNLOCK button on the RKE
transmitter.

Memory Position Recall

NOTE:
The vehicle must be in PARK to recall
memory positions. If a recall is attempted
when the vehicle is not in PARK, a message
will be displayed in the Driver Information
Display (DID).
89