Jeep Grand Cherokee SRT 2015 Operating Information Manual page 185

NOTE:
If the vehicle is programmed 1st Press Of
Key Fob Unlocks "All Doors," all doors will
unlock no matter which Passive Entry
equipped door handle is grasped. If 1st
Press Of Key Fob Unlocks "Driver Door" is
programmed, only the driver's door will un-
lock when the driver's door is grasped. With
Passive Entry, if 1st Press Of Key Fob Un-
locks "Driver Door" is programmed, touch-
ing the handle more than once will only
result in the driver's door opening. If "Driver
Door" is selected, once the driver door is
opened, the interior door lock/ unlock
switch can be used to unlock all doors (or
use RKE transmitter).
• Passive Entry
This feature allows you to lock and unlock the
vehicle's door(s) without having to press the
Remote Keyless Entry (RKE) transmitter lock or
unlock buttons. To make your selection, press
the "Passive Entry" button on the touchscreen
until a check-mark appears next to setting,
showing that setting has been selected. Press
182
the back arrow button on the touchscreen to
return to the previous menu. Refer to "Keyless
Enter-N-Go™" in "Things To Know Before Start-
ing Your Vehicle" for further information.
• Personal Settings Linked to Key Fob —
If Equipped
This feature provides automatic driver seat po-
sitioning to enhance driver mobility when enter-
ing and exiting the vehicle. To make your selec-
tion, press the "Personal Settings Linked to Key
Fob" button on the touchscreen, until a check-
mark appears next to setting, showing that
setting has been selected. Press the back arrow
button on the touchscreen to return to the
previous menu.
NOTE:
The seat will return to the memorized seat
location (if Recall Memory with Remote Key
Unlock is set to ON) when the Remote Key-
less Entry (RKE) transmitter is used to un-
lock the door. Refer to "Driver Memory Seat"
in "Understanding The Features Of Your
Vehicle" for further information.
• Power Lift Gate Alert — If Equipped
This feature plays an alert when the power lift
gate is raising or lowering. To make your selec-
tion, press the "Power Lift Gate Alert" button on
the touchscreen, until a check-mark appears
next to setting, showing that setting has been
selected. Press the back arrow button on the
touchscreen to return to the previous menu, or
push the back button on the faceplate.
Auto-On Comfort
After pressing the "Auto-On Comfort" button on
the touchscreen the following settings will be
available.
• Auto-On Driver Heated/Ventilated Seat &
Steering Wheel With Vehicle Start — If
Equipped
When this feature is selected the driver's
heated seat and heated steering wheel will
automatically turn ON when temperatures are
below 40° F (4.4° C). When temperatures are
above 80° F (26.7° C) the driver vented seat will
turn ON. To make your selection, press the
"Auto Heated Seats" button on the touchscreen,
until a check-mark appears next to setting,