Pcl Setup Menu - Xerox Phaser 6500 User Manual

Control Panel Menus
Item
Clear Storage
Reset Fuser

PCL Setup Menu

Use this menu to configure settings for PCL. The PCL driver is used for applications requiring PCL. For
PCL print driver options, see
Item
Paper Tray
Paper Size
Orientation
2-Sided
Font
Symbol Set
Font Size
Font Pitch
Form Line
Quantity
98 Phaser 6500 Color Laser Printer
User Guide
Downloaded From ManualsPrinter.com Manuals
Description
Deletes documents stored in the RAM in the printer.
Resets the fuser life counter to the starting point (0).
Printing Options for Windows PCL Driver
Description
Specifies the paper tray to use when the Paper Tray setting in the PCL print
driver is set to Auto Select.
• Auto (default)
• Tray 1
• Tray 2 (optional; if installed)
• Manual Feed Slot
Specifies the default paper size to print.
Specifies the default paper orientation:
• Portrait (default)
• Landscape
Specifies 2-sided printing settings:
• 2-Sided Print: Specifies whether to perform 2-sided printing. The default
is Off. The default setting is ON when the duplex unit is installed.
• Binding Edge: Specifies the binding direction from Flip Long Edge
(default) or Flip Short Edge.
Specifies the font to use. The default font is Courier.
Specifies the font to use for symbols. The default is Roman-8.
Specifies the font size. The default size is 12.00. You can specify a value
from 4.00 through 50.00 in increments of 0.25. Available only for
typographic fonts.
Specifies the character spacing. You can specify a value from 6.00 through
24.00 in increments of 0.01. The default is 10.00.
Specifies the form line (the number of lines per form). You can specify a
value from 5 through 128 in increments of 1. The default is 60.
Specifies the number of copies to print. You can specify a value from 1
through 999. The default is 1.
on page 63.