Connecting Using Usb - Xerox Phaser 6500 User Manual

Installation and Setup

Connecting using USB

To use USB, you must have Windows Server 2003 and later or Windows XP SP1 and later. Macintosh
users must use Mac OS X, version 10.5 and later.
To connect the printer to the computer using a USB cable:
1. Make sure that the printer is turned off.
2. Connect one end of a standard A/B USB 2.0 cable to the USB Port of the printer.
3. Attach the power cord and then plug in the printer and turn it on. For safety information, see Power
Cord on page 10.
4. Connect the other end of the USB cable to the USB Port on the computer.
5. When the Windows Found New Hardware Wizard appears, cancel it.
6. You are ready to install the print drivers. Go to Installing the Print Drivers on page 36.
Phaser 6500 Color Laser Printer 31
User Guide
Downloaded From ManualsPrinter.com Manuals