Safety Instructions - Hefter TF MINI plus Operating Manual

1. INTRODUCTION

1.3. Safety instructions

a. The machine must be used only in a technical good condition as well as in
accordance with the regulations, also considering the safety and risk according to
the operating instructions.
b. The operating instructions must be stored close to the machine and ready to
hand.
c. The manufacturer cannot be held liable for any personal injury or material
damage occurred due to inadequate handling of the machine.
d. Do only use the power cord supplied or released by HEFTER Systemform. Take
care that the connexion cable is not damaged.
e. In case of re-locating the TF M series from a cold environment: You must wait at
least 2 hours before starting the machine. The TF M series adapts to the room
temperature automatically. Possible humidity escapes.
f. In case of unauthorized reconstruction or changes of the machine the
manufacturer does not undertake any liability.
For your own safety
a. Before starting the machine you need to read the operating instruction and store it
ready to hand.
b. Do not grip into the machine during the operation => Risk of injury!
c. Long hair, clothes such as ties and jewellery can be grasped by the rotary wheels.
Use of the machine under these circumstances is inadequate.
d. Connect the folder only to a plug with grounded contact.
e. Before any grip into the machine it must first be switched of and the power cord
must be disconnected.
Do not put any small/thin objects into the machine ⇒ Risk of electrocute!
f.
g. In case of any problems with the TF M series switch the machine of, disconnect
the power cord and have the machine checked by a HEFTER Systemform
Service Technician.
h. Before you clean the TF M series or remove it do not forget to disconnect the
power cord.
i. Disconnect the power cord in case of a thunderstorm or if the machine is not used
for a longer period of time.
j. Have the maintenance and repair works only done by a HEFTER Systemform
Service Technician or by skilled personnel, authorized by HEFTER Systemform.
In case of non compliance the warranty claim will stop.
k. The machine must be protected against splash water.
l. Take care that no liquids get into the machine.
3