Introduction; General Information; User Information - Hefter TF MINI plus Operating Manual

1. INTRODUCTION

1.1. General information

The folder TF M series is a folding machine which has been constructed for the office
environment. It can process documents with different widths as well as various fold types.
The different fold types can be adjusted at the fold plates.

1.2. User information

The folder TF M series is a folding machine which is only destined for the folding of paper.
Any other use is not according to its specifications. The manufacturer/supplier is not liable
for any damage resulting of such un-allowed handling.
Use according to its specifications also includes the consideration of the operating manual
and the compliance with the maintenance instructions.
Any service, repair and maintenance must only be performed by skilled persons of the
manufacturer or by authorized persons.
The folder TF M series is a table top machine and can, therefore, be placed onto an
existing table or a cabinet with a plane, scratch resistant and antislip surface. There do not
exist any special requirements with regard to the warranty of the stability during operation.
The mains voltage must correspond to the indication on the type plate and the power.
Just printed documents must be dried completely before they can be processed. Otherwise
the rollers will get dirty.
Very bent or wavy sheets must be smoothed before the folding process starts.
2