Select The Fold Type; Set-Up Instructions; Set-Up 1 - Din A4 Sheet - Wrap Fold (C Fold); Set-Up 2 - Din A4 Sheet - Z Fold - Hefter TF MINI plus Operating Manual

3. WORKING WITH THE MACHINE

3.3. Select the fold type

The TF M series has two
fold pockets!
Position marker A for
the first fold pocket
(incl. closing pusher)
Vernier adjustment A
Position marker B for
the second fold pocket
(incl. closing pusher)
Vernier adjustment B
To change the fold pocket position; first push the position marker A or B down
(Quickadjustment, see point 2.1.).
Now you can adjust the position, depending on the required fold type (acc. to the
scale) (also see under point 3.4)
For just one folding (e.g. single fold) the position marker A is turned completely to the
right side (up to the symbol <).
To fix the fold pocket position release the closing pusher (= locked). The position
marker have to snap in complete (flash with the front cover).
NOTE: During the changing process of the fold pocket position marker no paper may
be in the folding wheel!

3.4. Set-up instructions

Pos. Feeding Paper
instruction size
3.4.1. A4
3.4.2. A4
3.4.3. A4
3.4.4. A4
3.4.5. A4
B
Fold Address Position
type position lever, fold
pocket 1
Wrap
fold
Z fold
Single
fold
Double-
parallel
fold
Door fold
A
Position
lever, fold
pocket 2
10