Reference Part; Error Handling - Hefter TF MINI plus Operating Manual

4. REFERENCE PART

4.1. Error handling

Error description
Machine does not start
Display does not light up
Paper jam in the
machine
Paper jam in the stacker
Fold A is too short
Fold A is too long
Fold B is too short
Fold B is too long
Paper is not fed good
enough
The fold is to slope
Paper is not fed together
(only for the TF MULTI+)
Error description on the display:
Error 1
Error 2
Error 3
Error 4
Possible reason Corrective action
No current Check the power supply, the socket
and the cable
Fuse blown out Check the fuse (see page 14, fuse
type 1,5 A slow)
Fold pockets are Remove any possible paper in the fold
blocked pockets (see drawing page 14)
Feeding is blocked Remove any possible paper at the
feeding unit (see point 2.4)
Stacker is not drawn Move the stacker to the correct
out far enough position according to the fold type (see
under 2.3)
Fold pocket 1 is Move the position index A for the fold
displaced A downwards (see under 3.5)
Fold pocket 1 is Move the position index A for the fold
displaced A upwards (see under 3.5)
Move the position index B for the fold
Fold pocket 2 is
displaced B upwards (see under 3.5)
Fold pocket 2 is Move the position index B for the fold
displaced B downwards (see under 3.5)
Pressure spring Move the pressure spring at the rear
displaced of the paper tray (see under 2.1)
Stronger pressure – Spring to +
Reduced pressure – Spring to -
Paper try displaced Correct the paper try (see under 3.6)
Feeding time is Correct the feeding time for the
wrong feeding stations (see under 3.8.2)
Lever for the paper Close the lever (see under 2.1)
jam removal is open
Overpowered Switch off the folder, remove a possible
The folder was paper jam and switch on the machine.
overpowered
Paper jam in the Remove any possible paper in the
machine Machine and the fold pockets (see
drawing page 14)
No paper tray Select the paper tray(s) needed (see
selected (only for under 2.1)
the TF MULTI plus)
15