Additional Set-Ups And Indications - Hefter TF MINI plus Operating Manual

3. WORKING WITH THE MACHINE

3.8. Additional set-ups and indications

3.8.1 Set-up of the feeding time at the TF Mini plus & TF Multi plus for the daily mail
The machine starts automatically with the daily mail mode according to an
factory settings: TF MINI +: 1.0 sec., TF MULT +: 2.0 sec.)
adjustable Time (
i.e. e.g. 1,0 seconds (MINI +) after inserting the sheets into the daily mail channel!
a. The feeding time can be set per key stroke! Press the key "reset" for about 4
seconds.
b. Then, the time set will be displayed. You can reduce this time by pressing ">" or
extend it by pressing ">>".
c. By pressing the key "reset" again you will reach the standard opearting mode. The
time lastly displayed was set and stored.
3.8.2 Set-up of the feeding time of the individual TF Multi plus feeding stations
The feeding times of the individual feeding stations are different since the distances
from each station to the folding wheels vary. – This means that the sheets are fed
with different time lags due to the different distances so that they will reach the
folding wheels at the same time.
Distance feeding station 1 = time lag 1 (factory settings: 0.50 sec.)
Distance feeding station 2 = time lag 2 (factory settings: 0.30 sec.)
Distance feeding station 3 = time lag 3 (factory settings: 0.40 sec.)
a. The feeding time can be set per key stroke!
Press the respective "feeding station key" about 5 seconds.
b. Then the time set will be displayed which you can reduce by pressing
">" or extend by pressing ">>".
NOTE: Change the feeding time only stepwise and only from one station at a time
so that you can find out if the folding result has been improved.
c. By pressing again the selected "feeding station key" you will be back in the
standard operating mode; the lastly displayed time was set and stored.
3.8.3 Display "Total Number of folds"
a. The total number of any folds made with this folder can be displayed per key
stroke! Just press the keys "10", "1" and Reset simultaneously.
b. Then the total number of folds will be displayed in steps of thousands,
e.g. 0001. = 1000 folds and . 0012 for total 1012 folds.
c. The display will disappear after a few seconds and you will be back in the
standard operating mode.
14