How To Correct The Fold Position - Hefter TF MINI plus Operating Manual

3. WORKING WITH THE MACHINE

3.5 How to correct the fold position

If you need to change the fold position this can be done very easily (scale +/-)
Move the position marker by using the vernier adjustment A or B.
1. Paper feeding
2. Select fold type
Wrap fold (DIN A4 document)
For the correct result of the wrap fold you need to adjust two fold positions.
The position marker A controls the length A.
The position marker B controls the length B.
To reduce length A
To increase length A
To reduce length B
To increase length B
Z-fold (DIN A4 documents)
For the correct result of the Z-fold you need to adjust two fold positions.
The position index A controls the length A.
The position index B controls the length B.
To reduce length A
To increase length A
To reduce length B
To increase length B
= move the position marker A to -
= move the position marker A to +
= move the position marker B to -
= move the position marker B to +
= move the position marker A to -
= move the position marker A to +
= move the position marker B to -
= move the position marker B to +
11