Specifying Your Output Settings - Matrox Convert DVI Installation And User Manual

Specifying your output settings

This section details how to specify your Convert DVI video and audio output
settings. Depending on your Convert DVI hardware, some of the output options
described in this section may not be available, and may not appear exactly as
shown.
¦ Note You must click Apply for the changes to the output settings to take
effect.
Open the Matrox Convert DVI Control Panel.
1
Click Output .
2
From the Output Format list, select the video format that you want for
3
Convert DVI's video output. However, your video output content, be it the
entire Convert DVI desktop or a selected region of interest (see
your region of interest settings"
displayed at this resolution. The scaling factor selected for your output
content determines how it's displayed relative to the selected video output
format (see
on page 33), may not necessarily be
"Scaling and positioning your output"
"Specifying
on page 46).
Specifying your output settings
27