Energy Conservation Mode - PRESONUS R65 Owner's Manual

3.6

Energy Conservation Mode

ACOUSTIC TUNING
HF Driver
Linear Linear
-1.5dB +1dB
(Green) (Green)
-3dB -1.5dB
-6dB -4dB
Acoustic
Space
(Red) (Red)
Your R65/R80 features an Energy Conservation mode.
When Energy Conservation mode is active, the onboard
amplifier will enter low-power mode after thirty minutes
of inactivity. Once signal is detected again, the amplifier
will take three seconds to return to full power.
By default, this mode is disabled but can be enabled
by pressing and holding the Acoustic Space and HF
Driver buttons simultaneously for 3 seconds. The
mode can be disabled by repeating this procedure.
Acoustic
Space
and hold and hold
When Energy Conservation mode is active, all four HF Driver
Linear
HP Filter
LEDs will illuminate green.
-1.5dB
-3dB
Linear
-6dB
60Hz
80Hz
100Hz
ACOUSTIC TUNING
When Energy Conservation mode is disabled, all four
Acoustic Space LEDs will illuminate red.
HF Driver
The Energy Conservation mode status can be
querried by simply pressing the Acoustic Space
and HF Driver buttons simultaneously.
Linear
Power User Tip: Because querying or changing Energy
Conservation Mode may inadvertently change your
-1.5dB
Acoustic Space or HF Driver setting, it is recommended
(Green) (Green)
that you double-check these settings afterwards.
-3dB
-6dB
ACOUSTIC TUNING
HF Driver
Press Press
Linear
+1dB
-1.5dB
-4dB
HP Filter
Linear Linear
60Hz
+1dB
80Hz
-1.5dB
-4dB 100Hz
R65 and R80 Owner's Manual
HP Filter
Linear
60Hz
80Hz
100Hz
11