Connections; Connecting Between The Camera; Head And Camera Control Unit; Connecting The Ac Power - Sony DXC-C33P Instructions For Use Manual

Connections

Connecting Between the
Camera Head and Camera
Control Unit
Connect the camera cable connector on the
camera head with the CAMERA connector
on the camera control unit using the CCMC-
20P05/10/30 camera cable (not supplied).
To connect the camera cable to the
camera head
1 Align the projection of the camera cable
connector with the notch on the connector
of the camera cable to insert.
2 Turn the
connector ring
to tighten.
To connect the camera cable to the
camera control unit
1 Align the projection of the CAMERA
connector with the notch on the connector
of the camera cable to insert.
A
C A M E R
2 Turn the
connector ring
to tighten.
34
Connections
Notes on connection between the
camera head and camera control unit
• Turn off the power supply for all
• Be sure to connect the camera head and
• Make correct connection with the male
• Insert the connectors of the cables
• The camera control unit is designed to be
Connector
(female)
Connect the supplied AC power cord to the
- AC IN socket on the camera control unit.
Connector
(male)
equipment before making any connection.
Be sure to turn off the camera when you
connect or disconnect the camera cable.
Connecting/disconnecting a cable while
the power is on may damage the camera.
camera control unit with the camera cable
before you turn on/off the power of the
camera.
and female sides of the connectors on the
camera cable. Incorrect connection may
cause damage to the camera.
properly. Loose connection often
generates noise. When pulling out a cable,
be sure to pull it out by the connector, not
the cable itself.
used with this camera head. Use both
together for optimum picture quality.

Connecting the AC Power

Cord