Basic Shooting Procedure
Press down the
the camera control unit to turn on the
The power indicator lights in green.
Turn on the powers of the connected
Adjust the black balance.
For details, see "Adjusting the Black
Balance" on the right column.
Illuminate an object with proper
Aim the camera to the object and
adjust the iris, focus and zoom.
Adjust the white balance.
For details, see "Adjusting the White
Balance" on page 30.
Adjust the settings as required.
For details, see "Adjusting and Setting
With Menus" on page 15.
(power) switch on
Adjusting the Black Balance
Adjust the black balance first, after turning
on the power of your camera.
If any menu is displayed on the screen,
MENU button to remove
If a color bar signal is displayed on the
screen, press the BARS button to
Press the BLACK button.
Close the iris before pressing the button.
The black balance is automatically
While adjusting, the bars are displayed.
When the adjustment is completed, the
message "BLACK: OK" appears on the
Black balance adjustment errors
If the black balance adjustment is not
successful, the message "BLACK: NG"
appears on the screen. If this happens, take
the necessary measures and perform steps 1
through 3 again.
For details, see "List of Messages" on page