Connector; With Dv Input Connector - Sony DXC-C33P Instructions For Use Manual

Connecting to Video Equipment With DV Input Connector
Video monitor
Video input

connector

DVCAM video
cassette recorder
Note
• i.LINK for the camera is especially designed to output signals in DV format.
Do not connect to the output connector on the connected equipment.
• The camera cannot control the DVCAM video cassette recorder connected
via i.LINK cable, such as for recording, playing and stop operations. Use the
relevant buttons on the DVCAM video cassette recorder for the operations.
Notes about i.LINK connections
1) Check that connectors are oriented properly before connecting an i.LINK
cable to your computer or to this unit. Trying to force an improperly
oriented connector may damage the connector or this unit.
2) Connect the i.LINK cable to your computer before connecting it to this unit.
This unit may be damaged by static electricity if you connect the cable to
this unit first.
3) Before connecting or disconnecting an i.LINK cable between this unit and
other equipment with an i.LINK connector, always power both this unit and
the connected equipment off and disconnect all power plugs from their
power outlets. Inserting or removing an i.LINK connector with the power
plugs still connected may cause a damaging surge of high-voltage power to
flow from the equipment's i.LINK connector into this unit.
75-ohm coaxial cable
T VIDEO
OUTPUT
VIDEO
S-VIDEO
i.LINK cable
(DV cable)
CCMC-20P05/10/30
Camera control unit (rear)
OUT PUT FS/TRIG IN EXT SYNC
DV HD
A C I N
REMOTE
VD/SYNC
RGB/SYNC
DV
Camera
head (rear)
camera cable
CAMERA
(front)
Power cord
37
Connections