Trip Button - Fiat 500 2015 User Manual

ELECTRONICS

TRIP BUTTON

The Trip button is located on the end of the wiper lever to the right of the steering col-
umn. The trip button can be used to display and reset the following functions:
• Range
• Distance Travelled
• Average Consumption
• Instant Consumption
• Average Speed
• Travel Time
• Short push (less than 1 second) to dis-
play different functions.
• Long push (more than 1 second) to re-
set and start a new trip.
New Trip
A new trip can be reset or restarted by:
• "Manual" resetting by the user, by push-
ing the Trip button.
• "Automatically" resetting, when the "Trip
distance" reaches 9999.9 miles or when
the "Travel time" reaches 99.59 (99 hours
and 59 minutes).
• After disconnecting/reconnecting
the battery.
Trip A
• Shows the total distance traveled for Trip A since the last reset.
Trip B
• Shows the total distance traveled for Trip B since the last reset.
Start Of Trip Procedure
• With the ignition key on, push and hold the TRIP button for over one second to reset
Trip A or Trip B.
Exit Trip
• The Trip function is over when all the values have been displayed or holding the
MENU button for longer than one second.
• Briefly push the MENU button to go back to the main screen or push and hold the
MENU button (approximately one second) to go back to the main screen without
storing settings.
50
Trip Button