Steering Wheel Audio Controls - Fiat 500 2015 User Manual

Steering Wheel Audio Controls

• The right hand control on the rear of the steering wheel is a rocker type switch with
a pushbutton in the center. Push the switch up for Volume +. Push the switch down
for Volume –. The button in the center is the SRC button used to change audio
sources (e.g. AM, FM, CD, Media Player).
• The left hand control on the rear of the steering wheel is also a rocker type switch
with a pushbutton in the center. Push the top of the switch to Scan Up. Push the
bottom of the switch to Scan Down. The button in the center is the PRESET UP/OK
button.
BLUE&ME™ Hands-Free Communication
• To use the hands-free feature, you need a Bluetooth® wireless technology enabled
mobile phone. This hands-free feature gives you the possibility of interacting vocally
with your mobile phone while driving, even if your mobile device does not feature this
capability. You can also interact with your mobile phone manually and visually using the
steering wheel controls and the instrument panel Electronic Vehicle Information Center
(EVIC) display.
• To get started with BLUE&ME™ hands-free feature with voice recognition, you have to
simply pair your Bluetooth® wireless technology enabled mobile phone with the system.
Pair Your Mobile Phone
• Push the VR button on the steering wheel then "Settings." At the end of the
BLUE&ME™ message say "Pairing." You may also access the pairing feature via the
menu by selecting it.
• The system will show the phone pairing PIN number on the EVIC display. For the next
two steps, consult your mobile phone owner' s manual about Bluetooth® pairing proce-
dures for your phone.
• On your mobile phone, search for devices equipped with Bluetooth® wireless technol-
ogy (the setting on your mobile phone might be called Discover or New Device).
In this list you will find BLUE&ME™ (name identifying the BLUE&ME™ system on
your car) select it.
• When prompted by the mobile phone, enter the PIN number shown on the instru-
ment panel display using your mobile phone keypad. If pairing is successful, the system
will say "Connecting" and at the end the display will show as confirmation message, the
ID of the paired mobile phone.
• It is essential to wait until you see this confirmation message on the display. Pushing
PHONE/MENU button on the steering wheel or MUTE/ESC button before the mes-
sage is displayed may cancel the pairing process. If the pairing process fails, an error
message will be displayed: in this event repeat the pairing procedure.
• At first pairing, BLUE&ME™ will say "Welcome" immediately after connecting. This
message will no longer be heard when your phone automatically connects to the
BLUE&ME™ system on future ignition cycles.
ELECTRONICS
45