Oil Change Message Reset; Trip Computer; Trip Button - Fiat 500 ABARTH 2017 Owner's Manual

Oil Change Message Reset

Your vehicle is equipped with an engine oil change
indicator system. The "Change Engine Oil" message
will appear in the instrument cluster display for ap-
proximately 5 seconds after a single chime has sounded
to indicate the next scheduled oil change interval. The
engine oil change indicator system is duty cycle based,
which means the engine oil change interval may fluc-
tuate, dependent upon your personal driving style.
Unless reset, this message will continue to display each
time the ignition is placed in the MAR (ACC/ON/
RUN) position. To turn off the message temporarily,
push and release the MENU button. To reset the oil
change indicator system (after performing the sched-
uled maintenance), refer to the following procedure.
1. Place the ignition in the MAR (ACC/ON/RUN)
position. (do not start the engine.)
2. Fully push the accelerator pedal slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
UNDERSTANDING YOUR INSTRUMENT PANEL 147

Trip Computer

The Trip Computer is located in the instrument cluster.
It features a driver-interactive display (displays infor-
mation such as trip information, range, fuel consump-
tion, average speed, and travel time).

Trip Button

The TRIP button, located on the right steering column
stalk, can be used to display and to reset the previously
described values.
• A short button push displays the different values.
• A long button push resets the system and then starts
a new trip.
New Trip
To reset:
• Push and hold the TRIP button to reset the system
manually.
• When the "Trip distance" reaches 99999.9 kilometers
(621370 miles) or when the "Travel time" reaches
99.59 (99 hours and 59 minutes), the system is reset
automatically.
4