OPERATING YOUR VEHICLE
Raising
1. From the convertible top fully open position, push the top CLOSE button once for
the partially open position.
2. Push the top CLOSE button a second time to partially close the convertible top.
3. Push and hold the CLOSE button to fully close convertible top.
NOTE:
Rail lubrication is recommended every 2000 cycles, or if scratching noises due to dust are
present. Use Berulub FR 43 grease.
Power Convertible Top Relearn Procedure
•
If your power convertible top does not operate in the Auto Open/Close mode
(automatically opening/closing to the 1/4 open and 3/4 open comfort stops), or if the
remote keyless power top function is inoperable, or if the trunk lid does not open -
the following relearn procedure may be necessary:
1. Confirm that the doors and trunk lid are closed.
2. Begin with the top in the fully closed position (using manual mode).
3. Hold the OPEN button to move the top to the fully open position.
4. CONTINUE to hold the OPEN button for an additional three seconds.
5. Release the OPEN button.
6. Hold the CLOSE button to move the top to the fully closed position.
7. CONTINUE to hold the CLOSE button until the top begins to cycle fully open, then
release the CLOSE button.
•
At the end of Step 7 the top will automatically cycle to the fully open position, and
then close to the 1/4 open position.
•
This will confirm that the relearn procedure was successful.
•
Auto Open/Close will now be functional. Trunk lid operation will be functional.
Remote Keyless Power Top Function will be functional.
NOTE:
DO NOT interrupt the power convertible top relearn procedure.
36