Webpage Upload; Figure 12. Firmware Uploading Window; Figure 13. Complete Firmware Uploading Window - Wiznet WIZ220IO User Manual

WIZ220IO User Manual V1.0

Figure 12. Firmware uploading window

⑥ If the file is uploaded, 'Complete firmware uploading' message will be displayed.

Figure 13. Complete firmware uploading window

3.6. Webpage Upload

① Execute WIZ220IO configuration tool and click 'Search' button.
② If the module is correctly connected to the network, its MAC address is displayed on the 'Board
list'.
③ Select the board at the 'Board list' and click 'web page Upload' button.
[Warning] Before uploading through Ethernet, the network information should be set for
correct network communication. The configuration tool send ping request automatically, and if
there is no reply from board, it will display error message.
④ When the dialog box is shown, select the Flash Rom File System (*.rom) file and click 'OPEN'
button.
[Warning] The Flash Rom File system should be created by usinig "Rom File Maker Tool
rev3.0". For the detail, refer to "3.6.1. Use of Rom File Maker rev3.0".
⑤ If the file is uploaded, 'Complete webpage uploading' message will be displayed.
3.6.1. Use of Rom File Maker rev3.0
Rom File Maker rev3.0 is the tool for creating ROM Image which enables the webpage to be stored in
the Flash memory.
① Select the webpage by using 'Add Files' button.
[Warning] There is limitation of file number in selecting at a time. (Normally, max 15 files can
- 17 -