3. Configuration Tool
The configuration tool supports below major functions. All functions of configuration tool can be
performed remote area through the Ethernet.
-
Change module's configuration.
-
I/O monitoring and controlling
-
Firmware uploading
-
Webpage uploading
3.1. Basic description
-
FW Version: It displays firmware version.
-
Enable Serial Debug Mode: If this mode is checked, you can monitor the status and socket
message (listen OK, connect fail etc.) through serial terminal.
-
Board List: If you click the "SEARCH" button, all the MAC address on a same subnet will be
Figure 8. Configuration Tool
- 12 -
WIZ220IO User Manual V1.0