Firmware Upload; Figure 11. Input / Output Tab Of The Configuration Tool - Wiznet WIZ220IO User Manual

WIZ220IO User Manual V1.0

Figure 11. Input / Output Tab of the Configuration Tool

3.5. Firmware Upload

① Execute WIZ220IO configuration tool and click 'Search' button.
② If the module is correctly connected to the network, its MAC address is displayed on the 'Board list'.
③ Select the board at the 'Board list' and click 'Upload' button.
[Warning] Before uploading through Ethernet, the network information should be set for
correct network communication. The configuration tool send ping request automatically, and if
there is no reply from board, it will display error message.
④ When the dialog box is shown, select the Binary file and click 'OPEN' button.
[Warning] Be sure to use firmware only for the WIZ220IO.
⑤ You can see below status window showing 'Processing'.
- 16 -