Appendix A - Technical Specifications; Warranty Terms; Warranty Registration - M-Audio BX8a User Manual

Appendix A - Technical Specifications
Type:
LF Driver:
HF Driver:
Frequency Response:
Crossover Frequency:
LF Amplifier Power:
HF Amplifier Power:
Maximum S/N:
(dynamic range)
Input Connectors:
Polarity:
Input Impedance:
Input Sensitivity:
Protection:
Indicator:
Power Requirements:
Cabinet:
Dimension:
Weight:
* Above specifications subject to change without notice
Your BX8a Warranty

Warranty Terms

M-Audio warrants products to be free from defects in materials and workmanship, under
normal use and provided that the product is owned by the original, registered user.
www.m-audio.com/warranty for terms and limitations applying to your specific product.

Warranty Registration

Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full
warranty coverage and helps M-Audio develop and manufacture the finest quality products available.
Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win
FREE M-Audio gear.
2-way near-field studio reference monitors
8-inch Kevlar curved cone with high temperature voice coil and damped
rubber surround.
1-inch magnetically shielded natural silk dome
40Hz - 22kHz
2.2kHz
70W
60W
> 100dB typical A-weighted
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
positive signal at + input produce outward LF cone displacement
20k ohms balanced,10k ohms unbalanced
85mV pink noise input produces 90dBA output SPL at one meter with volume
control at maximum
RF interference, output current limiting, over temperature, turn-on/off
transient, subsonic filter, external mains fuse.
power on/off indicator on rear panel
factory programmed for either 115V ~50/60Hz, 230V~50/60Hz
vinyl-laminated MDF
12" (H) x 10" (W) x 15" (D)
26.4 lbs. unit 11.97 kg
Studiophile BX8a
Visit
9