Appendix A - Technical Specifications - M-Audio Studiophile BX5a Deluxe User Manual

Appendix A - Technical Specifications

Type:
LF Driver:
HF Driver:
Frequency
Response:
Crossover
Frequency:
LF Amplifier Power:
HF Amplifier
Power:
S/N Ratio:
Input Connectors:
Polarity:
Input Impedance:
Input Sensitivity:
Protection:
Indicator:
Power
Requirements:
Cabinet:
Dimension:
Weight:
* Above specifications subject to change without notice
WARNING: This product contains chemicals, including lead, known to the State of California to
cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
Studiophile
BX5a Deluxe
Tested to comply with
FCC standards
FOR HOME OR STUDIO USE
© 2007 Avid Technology, Inc. All rights reserved. Product features, specifications, system
requirements and availability are subject to change without notice. Avid, M-Audio and Studiophile
BX5a Deluxe are either trademarks or registered trademarks of Avid Technology, Inc. All other
trademarks contained herein are the property of their respective owners
6
2-way near-field studio reference monitors
5-inch Kevlar curved cone with high temperature voice coil and damped
rubber surround. Magnetically shielded.
1-inch magnetically shielded natural silk dome
56Hz - 22kHz
3kHz
40W
30W
> 100dB typical A-weighted
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
positive signal at + input produce outward LF cone displacement
20k ohms balanced,10k ohms unbalanced
85mV pink noise input produces 90dBA output SPL at one meter with
volume control at maximum
RF interference, output current limiting, over temperature, turn-on/off
transient, subsonic filter, external mains fuse.
power on/off indicator on rear panel
factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or
100V~50/60Hz
vinyl-laminated high acoustic efficiency MDF
250 mm (H) x 176 mm (W) x 200 mm (D)
5.0 kg/unit (without packing)