Access The Product Rear Panel - HP ProLiant DL180 Gen9 Service Manual

After performing the installation or maintenance procedure, slide the server back into the enclosure,
2.
and then press the server firmly into the enclosure to secure it in place.
Do one of the following:
3.
In a server that uses thumbscrew rack ears, tighten the captive thumbscrews.
o
In a server that uses quick-release latch rack ears, if necessary, tighten the shipping screws.
o

Access the product rear panel

Opening the cable management arm
To access the server rear panel:
Release the cable management arm.
1.
Removal and replacement procedures 28