Using Wps As An Alternative Way To Set Up Your Wireless Network - Zoom 5360 User Manual

3 Test your wireless connection. Open your device's Web browser (for instance,
Internet Explorer, Firefox, or Chrome) and try to connect to a familiar Web address. If
you are unable to connect, make sure you followed the instructions. If you did,
please see Appendix A: Troubleshooting
Your device is now connected to your wireless network. If you want to connect additional
computers or devices, follow the instructions for your device by starting at the first page
of this chapter.
To disconnect from the current network:
1 On your computer that has a wireless adapter, find the wireless network connection
option (similar to the process of adding your computer to the network).
2 Click or highlight the Router's Wireless Security Name.
3 Select or click on Disconnect or similarly-named button.
Using WPS as an alternative way to set up your Wireless
Network
If all the Wi-Fi compatible wireless devices on your network support WPS, you can
choose to quickly setup your wireless network by pushing a button on your cable
modem/router and on each wireless device connecting to your cable modem/router.
Windows 8.1, 8 and Windows 7 users should follow the instructions below: Other
computers or devices such as tablets should go to
computer or other device that supports
If you are using a Windows 8.1, 8 or 7, computer:
1 Open Connect to a Network on that computer by right-clicking the network icon in
the notification area of the Windows taskbar.
2 A list of available networks is displayed.
3 Typically you then click on Zoomxxxx-5G to connect to your Cable Modem/Router's
5 GHz network. If you do not see Zoomxxxx-5G then most likely your wireless
adapter does not support the 5 GHz network, so click on Zoomxxxx. In both cases,
xxxx are the last 4 digits of the CM MAC address. You can find Zoomxxxx printed on
the label of your Cable Modem/Router. In the unlikely event that you changed the
SSID from the default, select your new SSID.
4 You will see a screen with a text box for the Security key. If WPS configuration is
supported, you may see a message such as You can also connect by pushing the
Tips.
If you are using a non Windows
WPS.
24