Backup/Restore - Zoom 5360 User Manual

Cable modem/router with n600 dual-band wireless
Hide thumbs Also See for 5360:
Table of Contents

Advertisement

The current status of the service is shown at the bottom of the DDNS web page.
Table 9. DDNS Menu Option
Option
Description
Select the type of service that you are registered for from your
DDNS Service
DDNS service provider.
Enter your DDNS account username subscribed to the service
User Name
provider.
Password
Enter the password of the account.
Host Name
Enter the host name of your service host.
IP Address
Shows the current WAN side public IP address.
Status
Shows the status of DDNS service.

Backup/Restore

Note: Some software versions may not support this feature.
The Backup page allows you to save the current Cable Modem/Router configuration
settings to a local PC. You can then later restore these settings if you need restore a
particular configuration, or to recover from changes you may have made that have had
an undesirable effect.
To backup the current configuration:
Click Backup and follow the prompts.
To restore a previous configuration:
Click Browse and use the navigation window to locate the file. (Usually
GatewaySettings.bin, unless you rename it before saving.) Once the file has been
located, click Restore to restore the settings.
Note: Once the settings are restored, the device will reboot.
To access the Backup page:
1
Click Basic in the menu bar.
2
Then click the Backup/Restore submenu.
 
59

Advertisement

Table of Contents
loading

Table of Contents