Using Wps To Set Up Your Wireless Network; Default Wireless Security Settings - Zoom 5350 User Manual

Zoom wireless-n cable modem/router user manual
Hide thumbs Also See for 5350:
Table of Contents

Advertisement

For those computer(s) and/or device(s) that support WPS, see
network. For those computer(s) and/or device(s) that do support WPA/WPA2 but that don't
support WPS, enter the default SSID and Pre-Shared Key below in the wireless network portion of
the device's configuration menus. (If you want setup tips for computers and other wireless-enabled
devices, go to
Appendix A: Tips for setting up computers and other devices on a wireless
network.)
Note: Typically, tablets like the iPad and e-readers don't support WPS but do support WPA/WPA2.

Default Wireless Security Settings

The default SSID is: ZOOM
The default Pre-Shared Key is:
4 characters of the Cable MAC address of the unit, which can be found on the label
on the bottom of the cable modem/router.
Note: If you want to change the default SSID and Pre-Shared Key, please refer to page 15 for
instructions.
In the unlikely event that one or more of your devices only supports WEP security, please refer to page 18
for instructions on how to configure WEP security.

Using WPS to set up your wireless network

If all the WiFi compatible wireless devices on your network support WPS:
1 Press the WPS LED pushbutton on the front panel of the router for 5 seconds. The WPS LED
should blink green.
2 Within 2 minutes (before the WPS LED light turns off), press the WPS button on the device that
you're linking wirelessly to the modem/router. The button may be a physical pushbutton on the
device or a button on a page of the device's wireless network configuration menus.
Note: Windows 7 SP1 (Service Pack 1) or the latest updates, or Windows Vista SP2
(Service Pack 2) users can use WPS for easy configuration.
a
Open Connect to a Network by right-clicking the network icon in the
notification area of the Windows taskbar.
b
A list of available networks is displayed.
c
Click ZOOM (or the SSID you changed the default to), and then click Connect.
d
You may see a screen with a text box for the Security key. If WPS configuration is
supported, you may see a message such as You can also connect by pushing the button on the
router.
 
Using WPS to set up your wireless
zoom####
####
where
11
represents the last

Advertisement

Table of Contents
loading

Table of Contents