Connecting A Macintosh Os X Computer With Built-In Wireless Capabilities - Zoom 5360 User Manual

Your computer is now connected to your wireless network. If you want to connect
additional computers or devices, follow the instructions for your device by starting at the
first page of this chapter.
To disconnect from the current network:
1 On your Windows desktop, click the Wireless Network Icon in the System Tray.
2 Click View Wireless Networks button.
3 Select your SSID (wireless security name) and click Disconnect.
Connecting a Macintosh OS X Computer with Built-in
Wireless Capabilities
1 Click the Wi-Fi icon in the menu bar. If the Wi-Fi icon does not appear on your menu
bar, please refer to your built-in Macintosh documentation for how to enable wireless.
Note: On versions prior to OS 10.7 the Wi-Fi icon is called AirPort.
2 Typically you then click on Zoomxxxx-5G to connect to your Cable Modem/Router's
5 GHz network. If you do not see Zoomxxxx-5G then most likely your wireless
adapter does not support the 5 GHz network, so click on Zoomxxxx. In both cases,
xxxx are the last 4 digits of the CM MAC address. You can find Zoomxxxx printed on
the label of your Cable Modem/Router. In the unlikely event that you changed the
SSID from the default, select your new SSID.
3 When prompted for the password in the next dialog box, enter your Pre-Shared Key
(Security Key/Password) and hit Join. Your Security Key/Password can be found on
the label of your Cable Modem/Router.
4 Test your wireless connection. Open your computer's Web browser and try to
connect to a familiar Website. If you are unable to connect, make sure you followed
the instructions. If you did, please see Appendix A: Troubleshooting
22
Tips.