Settings - Sanyo VCB-3442P Instruction Manual

SETTINGS

Camera setup section
EI
AI
BLC OFF
AGC OFF
• Electronic iris (EI)/Auto iris (AI) setting
• Backlight compensation (BLC) setting
•
Automatic gain control (AGC) setting
9
English
Electronic iris function setting
Use a manual or fixed iris lens and set the lens
aperture to the shortest F stop. Set the EI/AI
switch to EI position.
When using an auto-iris lens (for indoor/outdoor use)
Set the EI/AI switch to the AI position.
Note:
•
The electronic iris is suitable for normal indoor use. When the
EI/AI switch is set to the EI position, do not use an auto-iris lens.
• If used under fluorescent light, the image may flicker. In such a
case, change to incandescent lighting or set the EI/AI switch to
the AI position and use an auto-iris lens.
•
When shooting bright subjects, pay attention to the light angle in
order to avoid or minimize the smear phenomenon effect.
• If conditions are outside the electronic iris operation range or more
than the maximum illumination, it will cause saturation of the CCD.
In that case, use a manual iris lens.
EI
AI