Sanyo VCB-3444 Instruction Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Security Camera
  5. VCB-3444
  6. Instruction manual
Sanyo VCB-3444 Instruction Manual

Sanyo VCB-3444 Instruction Manual

Sanyo instruction manual b/w ccd camera vcb-3444
Hide thumbs Also See for VCB-3444:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
VCB-3444
INSTRUCTION MANUAL
B/W CCD Camera
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VCB-3444

Summary of Contents for Sanyo VCB-3444

  • Page 1 VCB-3444 INSTRUCTION MANUAL B/W CCD Camera About this manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.

  • Page 2: Table Of Contents

    Depending on the conditions of use, installation and environment, please be sure to make the appropriate settings and adjustments. If you need help with installation and/or settings, please consult your dealer. CONTENTS INFORMATION TO USER ... PRECAUTIONS... 3 PARTS NAMES... 4 MOUNTING THE LENS ...

  • Page 3: Information To User

    (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Sanyo may void the user’s authority to operate this camera. English...

  • Page 4: Precautions

    Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit.

  • Page 5: Parts Names

    PARTS NAMES Comes on when the power to the camera is on. PAHSE SHUTTER VIDEO OUT POWER AC 24 V When using two cameras or more, the image on the monitor may roll vertically when switching sources. This rolling can be minimized by turning this volume. Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
  • Page 6 PARTS NAMES The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately). The bracket can be fixed at the top or bottom of the camera. CAUTION: When installing the camera support, select a location that can support the total weight of the camera and accessories.
  • Page 7 • Concerning auto-iris lenses Compatible auto-iris lenses 1/3 inch Sanyo DC type lens If using a VIDEO type auto-iris lens Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned all the way to Av (Average).

  • Page 8: Mounting The Lens

    MOUNTING THE LENS Please use a DC type auto-iris lens (sold separately). C mount type lens CS mount type lens English Checking the lens mount Do not use a lens if length “L” is more than 9 mm. If not, that may damage the camera and prevent proper installation.
  • Page 9 MOUNTING THE LENS Pin layout If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the flange-back position as described below.

  • Page 10: Connections

    CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. Make the video signal connection between the camera and the monitor or time lapse VCR. Connect to 24 V AC UL listed class 2 power supply (sold separately). CAUTION: •...

  • Page 11: Settings

    SETTINGS Camera setup section • Internal sync (INT)/Line lock (LL) setting • Electronic iris (EI)/Auto iris (AI) setting • Backlight compensation (BLC) setting • Automatic gain control (AGC) setting Iris function setting Use a manual or fixed iris lens and set the lens aperture to the shortest F stop.

  • Page 12: Backlight Compensation Setting

    SETTINGS Lens iris adjustment If using a DC type auto-iris lens, you will need to set the LEVEL volume when shooting in the conditions described below. L (counterclockwise): To decrease the contrast H (clockwise): To increase the contrast • If shooting simultaneously in a dark room and through a bright window.
  • Page 13 SETTINGS High speed electronic shutter setting Normally, the speed setting switch for the high speed electronic shutter set to the 0 position. This sets the electronic shutter speed to 1/60 sec. The switch can be set as indicated in table A to select one of the 8 speeds available.

  • Page 14: Troubleshooting

    Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Centre. No picture on the monitor screen •...

  • Page 15: Specifications

    However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre. 0.8 mm : 24 V AC, 60 Hz : 4.0 W (with auto iris lens)

  • Page 16: Accessories

    SPECIFICATIONS Dimensions 1/4”–20 UNC Features and specifications are subject to change without prior notice or obligations. English ACCESSORIES Lens iris plug (4-pin)... 1 pc. Hexagonal wrench... 1 pc. PHASE SHUTTER VIDEO OUT POWER AC 24V...
  • Page 17 In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
  • Page 18 1AC6P1P2433-- L73Q4/US(0501KP-TVS) 98230002 21605 Plummer Street, Chatsworth, California 91311 Printed in Taiwan...

Table of Contents