Advertisement
SR-Series Manual
Model
SR-1KG
SR-5
SR-20
IX. Adjustment
1. Press the
2. Once the LCD shows "8888" tap the
times quickly until the inner code displays.
3. Press
by the required calibration weight (see chart).
4. Add the required weight. The display will show pass
and return to normal weighing mode.
5. Remove the weight and press and hold the
turn the scale off. Calibration is complete!
X. Troubleshooting
Problem: Scale will not turn on
•
•
Solution: Check the batteries
•
Problem: Display will not stabilize
Solution: Make sure the weight is stable on the
•
hook and not shaking or swinging
Problem: Displayed weight is inaccurate
•
•
Solution: Perform a calibration adjustment
Acceptable
Tolerance (±)
2g
0.015kg
0.03kg
key to turn the scale on.
again. The display will flash "CAL" followed
Calibration
Weight
1kg
5kg
10kg
Recommended
Accuracy Class
OIML M1
OIML M1
OIML M1
key several
key to
Advertisement
