Advertisement
SR-Series Manual
IV. Operation
1. Press the
2. Wait for the scale to stabilize (
the bottom left corner of the LCD). Place the item to
be weighed on the weighing hook.
3. When the weight is stable, the red light will turn on,
and HOLD will be displayed below the weight. (SR-5
and SR-20 only)
4. Remove the object(s) from the hook and tap the
key to re-zero the scale.
5. To turn the scale off, press and hold the
V. Auto-Off Selection
To conserve battery power, this scale is set to turn off
automatically after 60 seconds of inactivity.
1. To disable the auto-off feature, open the battery
compartment and locate the Auto-Off Select switch.
(see Section II)
2. Move the switch to the UP position to disable the
Auto-Off feature.
3. Move the switch to the DOWN position to enable the
Auto-Off feature.
VI. Changing the Unit of Measure
This scale can read in KG or LB (G/OZ for SR-1). To change
the weighing mode, follow these instructions:
1. Press and hold
weighing unit, then release.
2. Now tap the
weighing units.
key.
until the scale displays the current
key to toggle between the available
will be displayed in
key.
Advertisement
