Advertisement
3. After a couple of seconds of no activity the scale will
enter normal weighing mode with the selected unit.
• SR-1KG Units: g (gram) oz (ounce)
• SR-5, SR-20 Units: lb (pound) kg (kilogram)
VII.
Using the Tare Feature
You can use this scale's tare feature to subtract the weight
of an empty container or vessel for net weight determination.
NOTE: The weight of the container will subtract from the
available capacity.
1. Turn on the scale as described in Section IV.
2. Attach your tare item / empty container using
the hook and wait for it to stabilize (HOLD will be
displayed).
3. Tap the
4. You can now add items to the container to obtain
just the weight of the contents.
5. When the container is removed the weight will be
held on the display. Press
VIII.
Calibration
Calibration and adjustment are performed at the factory.
However, the weighing range can shift slightly during
shipping. Also, due to changes in local acceleration of gravity
around the world, adjustment is recommended when moving
the scale from one location to another. To check calibration:
1. Place the required calibration weight on the scale
and note the displayed value.
2. If the displayed value is not within acceptable
tolerance (see chart on next page), adjustment is
required.
button. "0.0" will be displayed.
again to zero the scale.
Advertisement
