Remote Chute Knob; How To Install The Speed Select Knob - Craftsman 536.888110 Operation Manual

NOTE" I fthecables h ave become dis-
connected, connect cables a sshown i n
Figure 7 .
Traction Drive Cable Auger Drive Cable
Figure 7
Remote Chute Knob
1. Assemble the remote chute knob
onto the lever until snug against the
nut (see Figure 8), On some mod-
els the remote chute knob is at-
tached,
2. Make sure lip on the remote chute
knob is pointed toward the engine.
3. Tighten the nut against the bottom
of the remote chute knob,
Lip _.
Nut _.... _
l_""_ Lever
Remote
Chute
Knob
Figure 8
HOW TO INSTALL
THE SPEED SELECT KNOB
Install the speed select knob to the
speed select lever. See Figure 9. On
some models the speed select knob is
attached.
_ Speed Select
Knob
_ _ Speed Select
Lever
Figure 9
F-041050L 9